Instalación y configuración del Red Hat 6.0
Obtención del kernel 2.2.14
http://www.linux.org/dist/kernel.html
Archivos de configuración
Basado en
http://www.bieringer.de/linux/IPv6/IPv6-HOWTO/IPv6-HOWTO-5.html
Por más información referirse a
ftp://ftp.bieringer.de/pub/linux/OldDocuments/ version 3.12
- Copia los siguientes archivos
| Archivo |
Ubicación |
| network-ip6 |
/etc/sysconfig/ |
| network-ip6.conf |
/etc/sysconfig/ |
- Copiar los siguientes archivos y crear un link for runlevel start & stop
/etc/sysconfig/network-ip6
- ## IPv6 network configuration? {yes|no}
#IP6NETWORKING=no
IP6NETWORKING=yes
- # Take information from the file
IP6INTERFACEFILE=/etc/sysconfig/network-ip6.conf
- ## Gateway network configuration for i.e. routing IPv6 packages
#over local IPv6 routers similar to the default gateway in IPv4
# Allow gateway configurations {yes|no}
#IP6GATEWAYCONFIG=no
IP6GATEWAYCONFIG=yes
- # Take information from the file
IP6ROUTEFILE=/etc/sysconfig/network-ip6.conf
- # Allow forwarding option, host is a router {yes|no}
#IP6FORWARDING=no
IP6FORWARDING=yes
- ## IPv6 tunnels for tunneling IPv6 packages over IPv4 routers to a
#IPv6 tunnel endpoint i.e. 6bone connection, ask a 6bone partner
#near your location for set up tunnel to you
# Allow IPv6 tunnel interface configuration {yes|no}
#IP6TUNNELCONFIG=no
IP6TUNNELCONFIG=yes
# Take information from the file
IP6TUNNELFILE=/etc/sysconfig/network-ip6.conf
/etc/sysconfig/network-ip6.conf
################# Tunnel section
#Device Key IPv4 gateway address
#sit2 tunnel IPv4-Address
#sit3 tunnel IPv4-Address
sit1 tunnel 198.108.0.3
# Tunnel route section. Here you can specify several routes
#to your configured tunnels. More than one are possible!
#Device Key Network
#sit2 route IPv6-Network/Prefix
#sit3 route IPv6-Network/Prefix
sit1 route 3ffe::/16
################# Interface section
## Here you can specify several addresses for your
#interfaces. More than one are possible!
#Device Key prefix suffix length
#eth0 iface fec0:0:0:1 0:0:0:1 64
eth0 iface 3ffe:1cd8:1:0 0:0:0:1 64
################# Gateway section
## Here you can specify several routes to your gateway.
#More than one are possible!
#Device Key Gateway address Network
#eth0 route fec0:0:0:1:0:0:0:20 fec0:0:0:2::/64
#eth0 route 3ffe:0400:0100:f102:0:0:0:1 3ffe::/16
eth0 route 3ffe:1cd8::2 ::0/0
Configuración de las interfaces
Equipo: ip6.rau.edu.uy
- eth0: configurada para que soporte IPv4 e IPv6
- eth1: configurada para que soporte IPv6
/etc/sysconfig/network-scripts/ifcfg-eth0 (normal network interface)
- especificar la dirección IPv4 de esta interfaz
IPADDR="164.73.128.8"
- habilitar la configuración IPv6 para esta interfaz
#IPV6INIT="no" # Inicializar IPv6 "no"
IPV6INIT="yes" # Inicializar IPv6 "yes"
- habilitar IPv6 forwarding para esta interfaz
#IPV6FORWARDING="no" # Controla {yes|no} forwarding a través de este dispositivo
IPV6FORWARDING="yes" # Controla {yes|no} forwarding a través de este dispositivo
- especificar la dirección IPv6 global (no link-local) de esta interfaz
IPV6ADDR="3ffe:1cd8:1::1/64" # Dirección IPv6 y prefijo
etc/sysconfig/network-scripts/ifcfg-eth1
- habilitar la configuración IPv6 para esta interfaz
#IPV6INIT="no" # Inicializar IPv6 "no"
IPV6INIT="yes" # Inicializar IPv6 "yes"
- habilitar IPv6 forwarding para esta interfaz
#IPV6FORWARDING="no" # Controla {yes|no} forwarding a través de este dispositivo
IPV6FORWARDING="yes" # Controla {yes|no} forwarding a través de este dispositivo
- especificar la dirección IPv6 global (no link-local) de esta interfaz
IPV6ADDR="3ffe:1cd8:2::1/64" # Dirección IPv6 y prefijo
- especificar que no tiene dirección IPv4 esta interfaz
IPADDR=0.0.0.0
Contactos:
Sergio Ramírez,
sramirez@seciu.edu.uy
María Cervantes,
mariac@seciu.edu.uy
|
|
Versión: Noviembre de 2005
Ubicación: http://www.rau.edu.uy/ipv6/rh6-0.htm
|
|